INGENIOUS Audio

Dimensions; 36.5”w x 5 3/4”d x 7 3/4”h
Weight: 25 pounds.
Amplifier: The ZVOX SOUNDBAR uses a 133 watt amplifier.
Inputs: Two rear “mixing” inputs (if two devices are connected and playing, you will hear both devices): dual RCA jack inputs. One front-panel mini-jack input (3.5mm) for use with portable audio devices (portable CD player, iPod, etc.). When any device is plugged into the front panel input, both rear inputs are automatically muted.
Frequency range: 35 Hz – 20 kHz.
Virtual surround sound: The ZVOX SOUNDBAR uses proprietary PhaseCue™ virtual surround sound system. PhaseCue™ , as its name implies, manipulates the phase of the separate channels to “fool the ear” into believing that sound is coming from a variety of sources throughout the room. Live music and well-recorded modern movie soundtracks will deliver rich, three-dimensional sound – pulling the sound out from the speakers and into the room, literally surrounding the listener
The ZVOX SOUNDBAR is bi-amplified, using a specially designed amplifier that includes electronic contouring for superb frequency response.
The ZVOX SOUNDBAR’s dual 4” subwoofers use a high-mass long-throw design in a ported enclosure. The subwoofers are side-firing to minimize the effect of sound transferring through to the neighboring room.
The ZVOX SOUNDBAR’s five 3.25" main speaker drivers use ferrofluid and neodymium magnets to create remarkably loud, remarkably clear sound.
S.A.N.E. circuit minimizes sudden bursts of sound. Viewers watching movies and sporting events often have to deal with sudden substantial changes in volume – changes that can disturb sleeping family members. The new S.A.N.E. (Sudden Audio Noise Eliminator) circuit, minimizes the impact of these sudden changes by compressing the sound levels.
The system is magnetically shielded so it can be used near a TV or monitor.
Unlike most systems in its category, the ZVOX SOUNDBAR uses an MDF (medium density fiberboard) wood cabinet - instead of plastic. MDF is the preferred construction material for high-performance speaker systems.
The ZVOX SOUNDBAR uses the Infinite Compliance ™ system - which connects the outer two main speakers with an acoustic tube. This system helps create big sound from a small cabinet.
A subwoofer output jack on the rear allows owners to connect a separate powered subwoofer (optional).
Auto-on/auto-off circuit senses sound from source (TV, iPod, PC) and turns on the ZVOX SOUNDBAR two seconds later. Approximately three minutes after it has received no signal, it automatically shuts the unit off.
Simple, single-cord connecting system uses a dual RCA jacks on rear panel.
A 2-meter RCA-RCA connecting cord is included.
A 2-meter Mini-Mini connecting cord is included (for use with portable audio devices connected to the front panel input).

Dimensions; 30.5”w x 5”d x 5.5”h
Weight: 13 pounds
Amplifier: The Smaller ZVOX Soundbar uses a 60 watt amplifier
Inputs: Two rear “mixing” inputs (if two devices are connected and playing, you will hear both devices): dual RCA jack inputs.
Frequency range: 45 Hz – 20 kHz.
The SMALLER ZVOX SOUNDBAR is bi-amplified, using a specially designed amplifier that includes electronic contouring for superb frequency response.
The SMALLER ZVOX SOUNDBAR’s 4” subwoofer uses a high-mass long-throw design and incorporates a 4” passive radiator for accurate low bass reproduction.
The SMALLER ZVOX SOUNDBAR’s three 3.25" main speaker drivers use ferrofluid and neodymium magnets to create remarkably loud, remarkably clear sound.
The system is magnetically shielded so it can be used near a TV or monitor.
Unlike most systems in its price range, the SMALLER ZVOX SOUNDBAR uses an MDF (medium density fiberboard) wood cabinet - instead of plastic. MDF is the preferred construction material for high-performance speaker systems.
The SMALLER ZVOX SOUNDBAR uses the Infinite Compliance ™ system - which connects the outer two main speakers with an acoustic tube. This system helps create big sound from a small cabinet.
The SMALLER ZVOX SOUNDBAR uses proprietary PhaseCue™ virtual surround sound system. PhaseCue™ , as its name implies, manipulates the phase of the separate channels to “fool the ear” into believing that sound is coming from a variety of sources throughout the room. Live music and well-recorded modern movie soundtracks will deliver rich, three-dimensional sound – pulling the sound out from the speakers and into the room, literally surrounding the listener.
A subwoofer output jack on the rear allows owners to connect a separate powered subwoofer (optional).
Auto-on/auto-off circuit senses sound from source (TV, iPod, PC) and turns on the SMALLER ZVOX SOUNDBAR two seconds later. Approximately three minutes after it has received no signal, it automatically shuts the unit off.
Simple, single-cord connecting system uses a dual RCA jacks on rear panel. A 2-meter RCA-RCA connecting cord is included.


Dimensions; 36.5”w x 5 3/4”d x 7 3/4”h Weight: 25 pounds. Amplifier: The ZVOX SOUNDBAR uses a 133 watt amplifier. Inputs: Two rear “mixing” inputs (if two devices are connected and playing, you will hear both devices): dual RCA jack inputs. One front-panel mini-jack input (3.5mm) for use with portable audio devices (portable CD player, iPod, etc.). When any device is plugged into the front panel input, both rear inputs are automatically muted. Frequency range: 35 Hz – 20 kHz. Virtual surround sound: The ZVOX SOUNDBAR uses proprietary PhaseCue™ virtual surround sound system. PhaseCue™ , as its name implies, manipulates the phase of the separate channels to “fool the ear” into believing that sound is coming from a variety of sources throughout the room. Live music and well-recorded modern movie soundtracks will deliver rich, three-dimensional sound – pulling the sound out from the speakers and into the room, literally surrounding the listener The ZVOX SOUNDBAR is bi-amplified, using a specially designed amplifier that includes electronic contouring for superb frequency response. The ZVOX SOUNDBAR’s dual 4” subwoofers use a high-mass long-throw design in a ported enclosure. The subwoofers are side-firing to minimize the effect of sound transferring through to the neighboring room. The ZVOX SOUNDBAR’s five 3.25" main speaker drivers use ferrofluid and neodymium magnets to create remarkably loud, remarkably clear sound. S.A.N.E. circuit minimizes sudden bursts of sound. Viewers watching movies and sporting events often have to deal with sudden substantial changes in volume – changes that can disturb sleeping family members. The new S.A.N.E. (Sudden Audio Noise Eliminator) circuit, minimizes the impact of these sudden changes by compressing the sound levels. The system is magnetically shielded so it can be used near a TV or monitor. Unlike most systems in its category, the ZVOX SOUNDBAR uses an MDF (medium density fiberboard) wood cabinet - instead of plastic. MDF is the preferred construction material for high-performance speaker systems. The ZVOX SOUNDBAR uses the Infinite Compliance ™ system - which connects the outer two main speakers with an acoustic tube. This system helps create big sound from a small cabinet. A subwoofer output jack on the rear allows owners to connect a separate powered subwoofer (optional). Auto-on/auto-off circuit senses sound from source (TV, iPod, PC) and turns on the ZVOX SOUNDBAR two seconds later. Approximately three minutes after it has received no signal, it automatically shuts the unit off. Simple, single-cord connecting system uses a dual RCA jacks on rear panel. A 2-meter RCA-RCA connecting cord is included. A 2-meter Mini-Mini connecting cord is included (for use with portable audio devices connected to the front panel input). Dimensions; 30.5”w x 5”d x 5.5”h Weight: 13 pounds Amplifier: The Smaller ZVOX Soundbar uses a 60 watt amplifier Inputs: Two rear “mixing” inputs (if two devices are connected and playing, you will hear both devices): dual RCA jack inputs. Frequency range: 45 Hz – 20 kHz. The SMALLER ZVOX SOUNDBAR is bi-amplified, using a specially designed amplifier that includes electronic contouring for superb frequency response. The SMALLER ZVOX SOUNDBAR’s 4” subwoofer uses a high-mass long-throw design and incorporates a 4” passive radiator for accurate low bass reproduction. The SMALLER ZVOX SOUNDBAR’s three 3.25" main speaker drivers use ferrofluid and neodymium magnets to create remarkably loud, remarkably clear sound. The system is magnetically shielded so it can be used near a TV or monitor. Unlike most systems in its price range, the SMALLER ZVOX SOUNDBAR uses an MDF (medium density fiberboard) wood cabinet - instead of plastic. MDF is the preferred construction material for high-performance speaker systems. The SMALLER ZVOX SOUNDBAR uses the Infinite Compliance ™ system - which connects the outer two main speakers with an acoustic tube. This system helps create big sound from a small cabinet. The SMALLER ZVOX SOUNDBAR uses proprietary PhaseCue™ virtual surround sound system. PhaseCue™ , as its name implies, manipulates the phase of the separate channels to “fool the ear” into believing that sound is coming from a variety of sources throughout the room. Live music and well-recorded modern movie soundtracks will deliver rich, three-dimensional sound – pulling the sound out from the speakers and into the room, literally surrounding the listener. A subwoofer output jack on the rear allows owners to connect a separate powered subwoofer (optional). Auto-on/auto-off circuit senses sound from source (TV, iPod, PC) and turns on the SMALLER ZVOX SOUNDBAR two seconds later. Approximately three minutes after it has received no signal, it automatically shuts the unit off. Simple, single-cord connecting system uses a dual RCA jacks on rear panel. A 2-meter RCA-RCA connecting cord is included.